How to solve the ink cartridge problem?

In case you are willing to clean the ink cartridges contacts then you will have to follow the below set of simple steps. We have made these steps simple and easy for you to understand and follow.

  • Step 1: Firstly to start off with this process you will have to check whether the HP Envy 5660 printer device is turned on.
  • Step 2: Then you will have to proceed with opening the access door of your 123.hp.com/envy5660 printer device.
  • Step 3: Then you will have to remove the cartridges that are indicated as error with the displayed prompt.
  • Step 4: Then you will have to locate the electrical contact of the error cartridges by holding its sides and placing it upside down.
  • Step 5: Also, note the electrical contacts are the small gold dots that are present on the ink cartridges.
  • Step 6: You should now wipe only the electrical contacts with a help of the cloth.
  • Step 7: Then you will have to locate the same electrical contacts of the cartridges inside the printer carriage.
  • Step 8: The electrical contacts inside the printer carriage will be looking like gold colored bumps so that it could meet the electrical contact of the cartridges.
  • Step 9: You should now wipe only the electrical contacts of the printer carriage with a help of the cloth.
  • Step 10: On cleaning, you will have to reinsert all the cartridges carefully.
  • Step 11: Then you will have to close the access door and then check whether the error message has been resolved.
  • Step 12: If you still receive this error message you will have to turn off your 123 hp envy5660  printer device and then turn it on again and continue with the above steps to resolve the issue.

How to replace the ink cartridge?

To replace the ink cartridges of your HP Envy 5660 printer device you will have to follow with the below set of steps. We have made these steps simpler and easy for you to understand and follow.

  • Step 1: Firstly to start off with this process you will have to check whether the 123 hp envy 5660 printer device is turned on.
  • Step 2: Then you will have to remove the old ink cartridges of the HP Envy 5660 printer device safely.
  • Step 3: To remove the old ink cartridges you will have to follow with the below set of simple steps.
  • Step 4: Firstly you will have to open the access door of your 123 hp envy 5660 printer device.
  • Step 5: Then you will have to open the latch that is present on the cartridges slot.
  • Step 6: On removing the latches, you will have to remove the old ink cartridges from the associated slot.
  • Step 7: On removing the old ink cartridges from the slot you will have to insert the new ink cartridges.
  • Step 8: To insert the new ink cartridges you will have to follow with the below set of simple steps.
  • Step 9: Firstly to start off with the process you will have to remove the new ink cartridges from its packages.
  • Step 10: Then you will have to remove the plastic tape that is surrounding the new ink cartridges with the pull tab that is present on both the sides of the packages.
  • Step 11: Then you will have to insert the ink cartridges into the slot.
  • Step 12: On inserting the new ink cartridges you will have to close the latches until it perfectly locks.

Get Guidance & Support Anytime From Us

We Reduce Your Burden Call us @ 1-844-554-2340

123.hp.com/envy5660

How to check the ink level?

Step 1: To check the ink cartridge level using the HP Envy 5660 printer device’s control panel, you will follow the below mentioned steps.

  • Firstly go to the home screen.
  • Then you will have to choose the ink icon.
  • Your estimated ink cartridges level will be displayed.

Step 2: In case you have to check the ink cartridge level using the HP printer software, then you will follow the below mentioned steps.

  • Firstly you will have to open the 123 hp envy 5660 printer software.
  • Then you will have to choose the Estimated Ink Levels option so that your estimated ink cartridge level will be displayed.

Step 3: In case you have to check the ink cartridge level using the HP utility, then you will follow the below-mentioned steps.

  • Firstly you will have to open the HP utility.
  • Then select your printer device from the list of the installed printer devices.
  • Then you will have to choose the Supplies Status option, so that your estimated ink cartridges level will be displayed.

Disclaimer

123-hp-com-envy5660.us is an independent service provider of tech support for third-party products. Any use of third party trademarks, brand names, product, and services is only for reference and to furnish information. If your product is covered by warranty, the support service may be available for free from the manufacturer. We disclaim any ownership in, right to, affiliation with, or endorsement by unless stated. Users are advised to review our policies before using our Web site.The Printer Driver for HP envy 5660 can also be downloaded from 123.hp.com/envy5660.